Anritsu LMR Master S412E - 10-13 [:SENSe] Subsystem

P25 Phase 1 Commands 10-13 [:SENSe] Subsystem
S412E PM PN: 10580-00319 Rev. N 10-35
10-13 [:SENSe] Subsystem
The commands in this subsystem relate to device-specific parameters, not signal-oriented
parameters.
[:SENSe]:APPLication:TST?
Description: Triggers an application self-test. This command returns a 1 if all the
tests passed and a 0 if one or more of the tests failed. Use
[:SENSe]:APPLication:TST:RESult? to retrieve the detailed
results of the test.
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To trigger a self-test:
:APPLication:TST?
Front Panel Access: Shift 8 (System), Application Self Test