5-2 :CALCulate Subsystem VNA Commands
5-30 PN: 10580-00319 Rev. N S412E PM
:CALCulate:SMOothing Subsystem
This subsystem contains functions for trace smoothing.
:CALCulate<Tr>:SMOothing:APERture <integer>
:CALCulate<Tr>:SMOothing:APERture?
Description: Sets the smoothing percentage for the given trace <Tr>. The query
form of the command returns the current smoothing percentage. <Tr>
is the trace number in the range 1 to 4. If no trace number is specified,
then the <Tr> parameter defaults to trace number 1. Note that setting
the smoothing also sets the given trace as the active trace if it is not
already active.
Syntax: :CALCulate<Tr>:SMOothing:APERture <integer>
:CALCulate<Tr>:SMOothing:APERture?
Cmd Parameter: <NR1> <integer>
Query Response: <NR1> <integer>
Default Value: 0
Range: 0to20
Front Panel Access: Shift 4 (Measure), Smoothing %
To Next Page
Loading...
