All Mode Commands 3-7 [:SENSe]:GPS Subsystem
S412E PM PN: 10580-00319 Rev. N 3-11
3-7 [:SENSe]:GPS Subsystem
This subsystem contains commands that relate to the optional GPS (Global Positioning
System) on the instrument.
[:SENSe]:GPS ON|OFF|1|0
[:SENSe]:GPS?
Title: GPS State
Required Option: 31
Description: Toggles GPS ON or OFF.
The query form of this command returns a 0 or 1 when GPS state is
OFF or ON, respectively.
Front Panel
Access: Shift-8 (System), GPS, GPS On/Off
[:SENSe]:GPS:CURRent?
Title: GPS Antenna Current
Required Option: 31
Description: Query only. Reads the current draw, in mA, of the GPS antenna.
Front Panel
Access: Shift-8 (System), GPS, GPS Info
[:SENSe]:GPS:RESet
Title: GPS Receiver Reset
Required Option: 31
Description: Resets the optional GPS receiver.
Front Panel
Access: Shift-8 (System), GPS, Reset
[:SENSe]:GPS:VOLTage 0|1
[:SENSe]:GPS:VOLTage?
Title: GPS Antenna Voltage
Required Option: 31
Description: Sets the GPS antenna voltage. Send the parameter value 0 to set the
voltage to 3.3 V. To set the voltage to 5 V, send a 1 as the parameter
value.
The query form of this command returns a 0 for an antenna voltage of
3.3 V and returns 1 for an antenna voltage of 5 V.
Front Panel
Access: Shift-8 (System), GPS, GPS Voltage
To Next Page
Loading...
