Anritsu LMR Master S412E - 15-3:DISPlay Subsystem

15-3 :DISPlay Subsystem PTC Commands
15-4 PN: 10580-00319 Rev. N S412E PM
15-3 :DISPlay Subsystem
This subsystem provides commands that modify the display of data for the user. They do not
modify the way in which data are returned to the controller.
:DISPlay[:WINDow]:TRACe:SELect?
Description: This command returns the current active trace number in the format
TRAC#.
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To query for the active trace number:
:DISPlay:TRACe:SELect?
Front Panel Access: Measurement, PTC Analyzer, Active Graph
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:PDIVision <value>
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:PDIVision?
Description: Sets the scale per division for the y-axis. In the PTC Analyzer
measurement, this value corresponds to the scale on the spectrum
graph type.
Cmd Parameters: <value>
Query Parameters: NA
Range: 1 to 15
Default Value: 10
Default Unit: NA
Example: To set the scale to 8:
:DISPlay:TRACe:Y:PDIVision 8
Front Panel Access: Amplitude, Scale