VNA Commands 5-11 [:SENSe] Subsystem
S412E PM PN: 10580-00319 Rev. N 5-67
[:SENSe]:CORRection Subsystem
This subsystem provides commands for losses or gains external to the instrument.
[:SENSe]:CORRection:DATA? <error terms parameters>
Description: Transfers the system error correction data from the instrument to the
controller. <error term parameter> are string parameters that
describe the different error terms.
The format of the block data that is returned can be specified by the
command :FORMat:DATA. The response begins with an ASCII header
that specifies the number of data bytes. It appears in the format #AX,
where A is the number of digits in X, and X is the number of bytes
that follow the header. Each data point is separated by a comma
delimiter. Each term contains one complex value (real and imaginary)
for each sweep point.
Cmd Parameter: NA (query only)
Query Parameter: <char> <error terms parameters>
Query Response: <char> (returns block data)
Related Command: :FORMat:DATA
Front Panel Access: NA
<error term parameter> Description
ERF (Forward) Reflection tracking
EDF (Forward) Directivity
ESF (Forward) Source match
ETF (Forward) Transmission tracking
ELF (Forward) Load match
EXF (Forward) Isolation
ETFS (Forward Sensitivity) Transmission tracking
ELFS (Forward Sensitivity) Load match
EXFS (Forward Sensitivity) Isolation
To Next Page
Loading...
