VNA Commands 5-10 :Trace Subsystem
S412E PM PN: 10580-00319 Rev. N 5-53
Example Response Format:
#AX is #40078, where A=4 (the number of digits in number X), and X = 0078 (the
response has 78 characters).
#40078SN=6897458,TYPE=DATA,DATE=2009-03-18-03-13-20-00,INT_BIAS_TEE_
CURRENT=0.000000
Parameters are returned in comma-delimited ASCII format. Each parameter is returned as
“NAME=VALUE[UNITS]”. For the example response, the serial number (SN) is 6897458 and
is returned as “SN=6897458”.
The following 3 tables describe some of the common parameters that can be returned by the
:TRACe:PREamble? command:
• Table 5-3, “Trace Header Parameters” on page 5-54
• Table 5-4, “Trace Header Marker Parameters” on page 5-62
• Table 5-5, “Trace Header Limits Parameters” on page 5-63
Note
The parameters that are returned depend on the firmware version in the S412E,
and this document does not cover all possible parameter values that can be
returned by the command.
To Next Page
Loading...
