LTE Commands 9-2 :CALCulate Subsystem
S412E PM PN: 10580-00319 Rev. N 9-3
:CALCulate:MARKer1:STATe OFF|ON|DELta
:CALCulate:MARKer1:STATe?
Title:
Set Marker 1 State
Description:
Sets marker 1 on/off or delta.
Parameter:
OFF|ON|DELta
Parameter Type:
<char>
Default Value:
OFF
Front Panel Access:
Marker, Marker Select (M1), Marker State
:CALCulate:MARKer1:X <x-parameter>
:CALCulate:MARKer1:X?
Title:
Set Marker 1 Value
Description:
Sets/Queries the location of marker 1 on the x-axis at the specified
location.
Parameter:
<x-parameter>
Default Unit:
Hz
Front Panel Access:
Marker, Marker Select (M1), Peak Search
:CALCulate:MARKer1:Y?
Title:
Marker 1 Read Y Value
Description:
Reads the current Y value for marker 1.
Default Unit:
dBm
:CALCulate:MARKer2:DELTa:X <x1 parameter>
:CALCulate:MARKer2:DELTa:X?
Title:
Delta Marker X Value
Description:
Sets/Queries the relative location of the delta marker from the reference
marker on the x-axis.
Note: The query value might not always match the set value since the
instrument will round the set value based on the display pixel
resolution.
The x1 parameter is used to set the delta position.
For example, :CALC:MARK2:DELT:X 2 MHz will set the delta value to
2 MHz.
Parameter:
<x1 parameter>
Default Unit:
Hz
Related Command:
:CALCulate:MARKer2:X
Front Panel Access:
Marker, Marker Select (M2), Marker State (Delta), (Use arrow keys or
rotary knob.)
To Next Page
Loading...
