11-10 :SOURce Subsystem P25 Phase 2 Commands
11-24 PN: 10580-00319 Rev. N S412E PM
:SOURce:DM:PATTern:LIST?
Description: Retrieves a list of signal generator pattern names and the index number
that is used to set the pattern. The pattern names match the names of
the pattern list that pops up when the Tx Pattern button is pushed and
the index number is the position of the pattern on that list. The
command returns a list with the following format:
Patterns when Mod Type is set to Base Station (:DM:FORMat BS) and
TX Slot set to None:
0: p252_bs_1031
1: p252_bs_1031_cal
2: p252_bs_silence
3: cw
4: am_1khz_audio
5: fm_1khz_audio
Patterns when Mod Type is set to Mobile Station (:DM:FORMat MS)
and TX Slot set to None:
0: p252_ms_1031_0
1: p252_ms_1031_1
2: p252_ms_1031_2
3: p252_ms_1031_cal_0
4: p252_ms_1031_cal_1
5: p252_ms_silence_0
6: p252_ms_silence_1
7: cw
8: am_1khz_audio
9: fm_1khz_audio
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To retrieve the signal generator pattern list:
:SOURce:DM:PATTern:LIST?
Front Panel Access: Setup, Tx Pattern
To Next Page
Loading...
