Anritsu LMR Master S412E - Page 419

dPMR Commands 13-2 :CONFigure Subsystem
S412E PM PN: 10580-00319 Rev. N 13-3
:CONFigure:COVerage
Description: This command configures the dPMR Coverage measurement. Certain
settings from the previous measurement (Mapping Type) will be backed
up when exiting this measurement and restored when entering this
measurement. All other settings carry over from one measurement to
the other.
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to dPMR Coverage:
:CONFigure:COVerage
Front Panel Access: Measurement, dPMR Coverage
:CONFigure:SIGAnalyzer
Description: This command configures the dPMR Analyzer measurement. Certain
settings from the previous measurement (Ref Lvl, Scale, Graph Types,
Maximize) will be backed up when exiting this measurement and
restored when entering this measurement. All other settings carry over
from one measurement to the other.
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To switch the measurement to dPMR Analyzer:
:CONFigure:SIGAnalyzer
Front Panel Access: Measurement, dPMR Analyzer