Anritsu LMR Master S412E - Page 483

DMR 2 Commands 14-10 :SOURce Subsystem
S412E PM PN: 10580-00319 Rev. N 14-27
:SOURce:DM:PATTern:LIST?
Description: Retrieves a list of signal generator pattern names and the index number
that is used to set the pattern. The pattern names match the names of
the pattern list that pops up when the Tx Pattern button is pushed and
the index number is the position of the pattern on that list. The
command returns a list with the following format:
Base Station Mod Type:
0: dmr2_bs_1031
1: dmr2_bs_511(O.153)
2: dmr2_bs_silence
3: dmr2_bs_1031_1_pcnt_ber
4: dmr2_bs_511(O.153)_1_pcnt_ber
5: dmr2_bs_tscc
6: cw
7: am_1khz_audio
8: fm_1khz_audio
Mobile Station Mod Type:
0: dmr2_ms_1031
1: dmr2_ms_511(O.153)
2: dmr2_ms_silence
3: dmr2_ms_1031_1_pcnt_ber
4: dmr2_ms_511(O.153)_1_pcnt_ber
5: cw
6: am_1khz_audio
7: fm_1khz_audio
Cmd Parameters: NA
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To retrieve the signal generator pattern list:
:SOURce:DM:PATTern:LIST?
Front Panel Access: Setup, Tx Pattern