Anritsu LMR Master S412E

To Next Page

To Previous Page

DMR 2 Commands 14-11 :TRACe Subsystem

S412E PM PN: 10580-00319 Rev. N 14-35

NUMERIC_DISPLAY

Determines what values are displayed in the Analyzer

summary window.

DEMOD_TYPE

Modulation type (used with P25, P25p2, DMR, and

PTC).

MOD_BANDWIDTH

Modulation bandwidth (used with NXDN and dPMR

only).

RX_SLOT

Receiver (Rx) time slot selection (Only used for

DMR 2).

TX_SLOT

Generator (Tx) time slot selection (Only used for

DMR 2).

HIGH_PASS_FILTER

High pass filter selection (Only used for NBFM). 0 is

300 Hz, 1 is 3 kHz, 2 is None.

LOW_PASS_FILTER

Low pass filter selection (Only used for NBFM). 0 is

300 Hz, 1 is 3 kHz, 2 is 15 kHz, 3 is None.

AUDIO_SPECTRUM_SPAN

Span for the Audio Spectrum graph in NBFM Analyzer

(Only used in NBFM).

AUDIO_WAVE_SWEEP_TIME

Sweep time for the Audio Waveform graph in NBFM

Analyzer (Only used in NBFM).

DEEMPHASIS

State of the De-emphasis filter (Only used in NBFM).

0 is ON and 1 is OFF.

SINAD_MAPPING_EXCELLENT

Threshold at which the SINAD mapping value is

deemed excellent (Only used in NBFM).

SINAD_MAPPING_VERY_GOOD

Threshold at which the SINAD mapping value is

deemed very good (Only used in NBFM).

SINAD_MAPPING_GOOD

Threshold at which the SINAD mapping value is

deemed good (Only used in NBFM).

SINAD_MAPPING_FAIR

Threshold at which the SINAD mapping value is

deemed fair (Only used in NBFM).

SINAD_MAPPING_POOR

Threshold at which the SINAD mapping value is

deemed poor (Only used in NBFM).

CARRPWR_MAPPING_EXCELLENT