15-10 :SOURce Subsystem PTC Commands
15-24 PN: 10580-00319 Rev. N S412E PM
:SOURce:DM:PATTern:LIST?
Description: Retrieves a list of signal generator pattern names and the index number
that is used to set the pattern. The pattern names match the names of
the pattern list that pops up when the Tx Pattern button is pushed and
the index number is the position of the pattern on that list. The
command returns a list with the following format:
4FSK, Symbol Rate 6000:
0: ptc_4fsk_Pattern0_6000
1: ptc_4fsk_Pattern1_6000
2: ptc_4fsk_Pattern2_6000
3: cw
4: am_1khz_audio
5: fm_1khz_audio
4FSK, Symbol Rate 8000:
0: ptc_4fsk_Pattern0_8000
1: ptc_4fsk_Pattern1_8000
2: ptc_4fsk_Pattern2_8000
3: cw
4: am_1khz_audio
5: fm_1khz_audio
4FSK, Symbol Rate 12000:
0: ptc_4fsk_Pattern0_12000
1: ptc_4fsk_Pattern1_12000
2: ptc_4fsk_Pattern2_12000
3: cw
4: am_1khz_audio
5: fm_1khz_audio
4FSK, Symbol Rate 16000:
0: ptc_4fsk_Pattern0_16000
1: ptc_4fsk_Pattern1_16000
2: ptc_4fsk_Pattern2_16000
3: cw
4: am_1khz_audio
5: fm_1khz_audio
4FSK, Symbol Rate 18000:
0: ptc_4fsk_Pattern0_18000
1: ptc_4fsk_Pattern1_18000
2: ptc_4fsk_Pattern2_18000
3: cw
4: am_1khz_audio
5: fm_1khz_audio
To Next Page
Loading...
