15-13 [:SENSe] Subsystem PTC Commands
15-46 PN: 10580-00319 Rev. N S412E PM
[:SENSe]:SYMBolspan <value>
[:SENSe]:SYMBolspan?
Description: Sets the symbol span. Please note that this setting only affects the
Eye Diagram in the PTC Analyzer measurement. Please note that
setting the symbol span will restart the sweep.
Cmd Parameters: <value>
Query Parameters: NA
Range: 2 to 5
Default Value: 2
Default Unit: NA
Example: To set the symbol span to 4:
:SYMBolspan 4
Front Panel Access: Measurement, PTC Analyzer, Symbol Span
To Next Page
Loading...
