16-3 :DISPlay Subsystem NBFM Commands
16-6 PN: 10580-00319 Rev. N S412E PM
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:IFPercent <Percentage>
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:IFPercent?
Description: Sets the IF bandwidth percent. This setting adjusts the Y-Axis scale for
the Audio Spectrum and Audio Waveform graphs in the NBFM
Analyzer measurement mode.
Cmd Parameters: <Percentage>
Query Parameters: NA
Range: 1% to 100%
Default Value: 50.00
Default Unit: NA
Example: To change the IF Bandwidth % to 30%:
:DISPlay:TRACe:Y:IFPercent 30.00
Front Panel Access
Front Panel Access: Setup, Filters, % IFBW
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:PDIVision <value>
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:PDIVision?
Description: Sets the scale per division for the y-axis. In the NBFM Analyzer
measurement, this value corresponds to the scale on the spectrum
graph type.
Cmd Parameters: <value>
Query Parameters: NA
Range: 1 to 15
Default Value: 10
Default Unit: NA
Example: To set the scale to 8:
:DISPlay:TRACe:Y:PDIVision 8
Front Panel Access: Amplitude, Scale
To Next Page
Loading...
