17-8 :MMEMory Subsystem TETRA Commands
17-16 PN: 10580-00319 Rev. N S412E PM
File name extensions:
“.spa” for SPA measurement
“.mna” for VNA and VVM measurements
“.hipm” for HiPM measurements
“.pm” for PM measurements
“.cwsg” for CWSG measurements
“.afp” for AM/FM/PM measurements
“.ia” for Interference Analysis measurements
“.cs” for Channel Scanner measurements
“.wmxd” for WiMAX
“.wmxe” for Mobile WiMAX
“.lte” for LTE measurements
“.p25” for P25 measurements
“.p252” for P25p2 measurements
“.nxdn” for NXDN measurements
“.dpmr” for dPMR measurements
“.dmr2” for DMR 2 measurements
“.ptc” for PTC measurements
“.tetra” for TETRA measurements
“.nbfm” for NBFM measurements
Cmd Parameters: <integer>,<filename>
Query Parameters: NA
Range: NA
Default Value: NA
Default Unit: NA
Example: To recall a measurement file:
:MMEMory:LOAD:TRACe 1,"xxx.tetra"
Front Panel Access: Shift 7 (File), Recall Measurement
Note IQ Data measurements cannot be recalled on the instrument.
To Next Page
Loading...
