Anybus CompactCom 40 User Manual

Anybus Module Objects 114 (258)
Command Details: Accept
Category
Extended
Details
Command Code 13h
Valid for: Instance
Description
This command accepts incoming connections on a listening TCP socket. A new socket instance is created for
each accepted connection. The new socket is connected with the host and the response returns its instance
number.
NONBLOCKING mode This command must be issued repeatedly (polled) for incoming connections. If no incoming
connection request exists, the module will respond with error code 0006h (EWOULDBLOCK).
BLOCKING mode This command will block until a connection request has been detected.
This command will only be accepted if there is a free instance to use for accepted connections. For blocking
connections, this command will reserve an instance.
• Command Details
(no data)
• Response Details
Field Contents
Data[0] Instance number for the connected socket (low byte)
Data[1] Instance number for the connected socket (high byte)
Data[2] Host IP address byte 4
Data[3] Host IP address byte 3
Data[4] Host IP address byte 2
Data[5] Host IP address byte 1
Data[6] Host port number (low byte)
Data[7] Host port number (high byte)
Anybus
®
CompactCom
™
40 PROFINET IRT Network Guide SCM-1202-023 EN 1.8

Anybus CompactCom 40 Specifications

General

Brand	Anybus
Model	CompactCom 40
Category	Control Unit
Language	English