Anybus CompactCom 40 - 14 Host Application Objects

Host Application Objects 156 (258)
14 Host Application Objects
14.1 General Information
This chapter specifies the host application object implementation in the module. The objects
listed here may be implemented within the host application firmware to expand the PROFINET
implementation.
Standard Objects
• Energy Measurement Object (E4h), p. 157
• Functional Safety Object (E8h), p. 172
• “ Application File System Object (EAh)” (see Anybus CompactCom 40 Software Design
Guide)
• “ Modular Device Object (ECh)” (see Anybus CompactCom 40 Software Design Guide)
• Sync Object (EEh), p. 174
• Energy Control Object (F0h), p. 178
• “Application Data Object (FEh)” (see Anybus CompactCom 40 Software Design Guide)
• “ Application Object (FFh)” (see Anybus CompactCom 40 Software Design Guide)
Network Specific Objects:
• Asset Management Object (E5h), p. 168
• PROFINET IO Object (F6h), p. 184
• Ethernet Host Object (F9h), p. 203
Anybus
®
CompactCom
™
40 PROFINET IRT Network Guide SCM-1202-023 EN 1.8