Appendix G: Conformance Test Guide 223 (258)
G Conformance Test Guide
G.1 General
When using the default settings of all parameters, the Anybus CompactCom 40 PROFINET IRT
is precertified for network compliance. This precertification is done to ensure that your product
can be certified.
Changes in the parameters in the example GSD file, supplied by HMS Industrial Networks AB,
will require a certification. A vendor ID can be obtained from PNO and is compulsory for certifi-
cation. This chapter provides a guide for successful conformance testing your product, contain-
ing the Anybus CompactCom 40 PROFINET IRT, to comply with the demands for network
certification set by the PNO.
Independent of selected operation mode, the actions described in this appendix have to be ac-
counted for in the certification process. The identity of the product needs to be changed to
match your company and device.
For multiple-API implementations, e.g. PROFIdrive, one of the submodules belonging to the
“non-zero API” must be inserted in the I&M0 Filter Data by the application, using the command
IM_Options.
This appendix provides guidelines and examples of what is needed for certification.
Depending on the functionality of your application, there may be additional steps to
take.
Please contact HMS Industrial Networks AB at www.anybus.com/support for more information.
Anybus
®
CompactCom
™
40 PROFINET IRT Network Guide SCM-1202-023 EN 1.8
To Next Page
Loading...
Need help?
General
