Appendix F: AIDA LED Mode 222 (258)
The Port Activity signals are always available in the host application connector in all operating
modes except 16 bit parallel. For more information consult the Anybus CompactCom M40 Hard-
ware Design Guide (module) or the Anybus CompactCom B40-1 Design Guide (brick).
When Transparent Ethernet is activated, the LED status signals are only available in the LED
status register.
Anybus
®
CompactCom
™
40 PROFINET IRT Network Guide SCM-1202-023 EN 1.8
To Next Page
Loading...