Anybus CompactCom 40 User Manual

Server Side Include (SSI) 64 (258)
9.5 SSI Output Configuration
Optionally, the SSI output can be permanently changed by adding the file \output.cfg.
File format:
[ABCCMessage_X]
0:“Success string”
1:“Error string 1”
2:“Error string 2”
...
16“:Error string 16”
Each error code corresponds to a dedicated output string, la-
belled from 1 to 16.
See Errors, p. 63
[GetConfigItem_X]
0: “Success string”
1:“Authentication error string”
2:“File open error string”
3:“Tag not found string”
Use “%s” to include the name of the file.
[SetConfigItem_X]
0: “Success string”
1:“Authentication error string”
2:“File open error string”
3:“File write error string”
Use “%s” to include the name of the file.
[IncludeFile_X]
0: “Success string”
1:“Authentication error string”
2:“File read error string”
Use “%s” to include the name of the file.
[scanf_X]
0: “Success string”
1:“Parsing error string”
-
[ChangeLanguage_X]
0: “Success string”
1:“Change error string”
-
All content above can be included in the file multiple times changing the value “X” in each tag
for different languages. The module will then select the correct output string based on the lan-
guage settings. If no information for the selected language is found, it will use the default SSI
output.
Value of X Language
0 English
1 German
2 Spanish
3 Italian
4 French
See also...
•
SsiOutput(), p. 50
Anybus
®
CompactCom
™
40 PROFINET IRT Network Guide SCM-1202-023 EN 1.8

Anybus CompactCom 40 Specifications

General

Brand	Anybus
Model	CompactCom 40
Category	Control Unit
Language	English