Anybus CompactCom 40 - Page 52

Server Side Include (SSI) 50 (258)
9.3.4 SsiOutput()
This command temporarily modifies the SSI output of the following command function.
Syntax:
<?--#exec cmd_argument='SsiOutput("success", "failure")'-->
success:
String to use in case of success
failure: String to use in case of failure
Default Output
(this command produces no output on its own)
Example
The following example illustrates how to use this command.
<?--#exec cmd_argument='SsiOutput ("Parameter stored", "Error")'-->
<?--#exec cmd_argument='SetConfigItem("File.cfg", Overwrite)'-->
See also...
• SSI Output Configuration, p. 64
9.3.5 DisplayRemoteUser
This command stores returns the username on an authentication session.
This command cannot be used in e-mail messages.
Syntax:
<?--#exec cmd_argument='DisplayRemoteUser'-->
Default Output
Scenario Default Output
Success (current user)
Anybus
®
CompactCom
™
40 PROFINET IRT Network Guide SCM-1202-023 EN 1.8