Anybus CompactCom 40 - Page 216

Appendix C: Flowcharts 214 (258)
C.4.2 Custom Configuration mismatch
This flowchart shows how to handle a configuration mismatch when the Real Identification has
been established by the host application (custom configuration).
Application receives
Expected_Ident_Ind
Expected Identification
matches Real Identification
Real Identification can
be adapted to Expected
Identification
FALSE
TRUE
Send “Continue”
Response
FALSETRUE
Send “Block”
Response
Pull mismatching
module/
submodule
Plug adapted
module/
submodule
Send
Ident_Change_Done
command
Done
Repeat for all
adaptable
modules/submodules
Fig. 20
Anybus
®
CompactCom
™
40 PROFINET IRT Network Guide SCM-1202-023 EN 1.8