Anybus CompactCom 40 User Manual

Server Side Include (SSI) 46 (258)
Command Valid for E-mail Messages
printf() Yes
scanf() No
9.3.2 GetConfigItem()
This command returns specific information from a file in the file system.
File Format
The source file must have the following format:
[key1]
value1
[key2]
value2
...
[keyN]
valueN
Syntax:
<?--exec cmd_argument='GetConfigItem("filename", "key"[,"separator"])'-->
filename: Source file to read from
key: Source [key] in file.
separator:
Optional; specifies line separation characters (e.g. “<br>”).
(default is CRLF).
Default Output
Scenario Default Output
Success (value of specified key)
Authentication Error “Authentication error”
File open error “Failed to open file ‘filename’”
Key not found “Tag (key) not found”
Anybus
®
CompactCom
™
40 PROFINET IRT Network Guide SCM-1202-023 EN 1.8

Anybus CompactCom 40 Specifications

General

Brand	Anybus
Model	CompactCom 40
Category	Control Unit
Language	English