Armor X7 - Changing the Power Button Default a; Table 27. Changing the Power Button Default Actions

SECTION 8 MAINTAINING YOUR ARMOR X7 PAGE 145
9711-26400-0001
EXPORT CONTROLLED – SEE PAGE 3
Rev -
Changing the Power Button Default A
Follow the procedure in Table 27 to change the default actions of the Power button.
Table 26. Changing the Power Button Default Actions
STEP
ACTION CONDITION OR INDICATION
1.
Select Start
à
Control Panel
à
Hardware & Sound
à
Power Options
The Power Options dialog window is
displayed.
2.
From the left panel, select Choose what
the power buttons do.
The Systems Settings window opens as
shown in Figure 76.
NOTE
The X10gx does not have a Sleep
button so ignore the bottom set
of options.
3.
Click on the pull-down menus in the On
battery and Plugged in
columns and
select the desired action.
The pull-down menu options are shown in
Figure 76.
4.
Click on the Save Changes
button at
the bottom of the window.