Armor X7 - Table 15. View and Manage Network Connections

SECTION 4 NETWORKING PAGE 81
9711-26400-0001
EXPORT CONTROLLED – SEE PAGE 3
Rev -
Table 15. View and Manage Network Connections
STEP
ACTION CONDITION OR INDICATION
1.
Select Start
à
Control Panel
à
Network and Internet
à
Network
and Sharing Center.
The window shown in Figure 35 opens.
2.
Click on the “Connect to a network”
link to open the window sh
own in
Figure 36. Click outside this window to
close it.
The label “Connected” will appear beside
each network you are currently
connected to. Any other available
networks are also listed.
The green signal bars indicate the
relative strength of the wireless signal. A
yellow shield indicates those sites that do
not have security enabled. Use caution
when connecting to these sites.
3.
To connect to a network, click on the
network name and select Connect. To
disconnect from an active network,
click on the name and select
Disconnect.
4.
For more detailed information on the
options and settings for these
windows, click on the Help icon