Armor X7 - Page 55

SECTION 3 GETTING STARTED PAGE 55
9711-26400-0001
EXPORT CONTROLLED – SEE PAGE 3
Rev -
STEP
ACTION CONDITION OR INDICATION
3.
Place the computer face down on a
clean surface and remove the 14
Philips screws securing the cooling
register.
4.
Carefully pry up the cooling register at
the slot provided (Figure 19
) and
remove.
5.
Carefully lift the socket
cover and
insert the SD card all the way into the
cover.
6.
Press the card down until it locks in
place.
7.
Replace the cooling register and
secure with 14 Philips screws.
8.
Reinstall the batteries and re-connect
external power if desired.