TD 92644EN
User Manual
Ascom d81 DECT Handset
3 Basic Operation
22
18 June 2018 / Ver. K
2.2.6 Pull Cord
The pull cord is 800 mm long. The pull cord is attached directly to the handset’s pull cord
connector on the upper right side.
2.2.7 Leather Casing
The leather casing is especially designed for the handset. The casing comes with a swivel
type belt clip and the handset is fully operational while placed in the casing.
2.2.8 Headset
A headset is recommended if the handset is frequently used and/or if the user wants to
have both hands free. The headset comes in two versions; Microphone on a boom and
Hearing protection.
IMPORTANT: The headset Microphone on a boom is not available as accessory for the EX
classified handset. If used, it is NOT permitted to use the headset in
hazardous area.
To achieve optimal audio quality with the different headset types it is recommended to
select the corresponding headset profile. See 7.9.2 Headset on page 82 for more
information.
NOTE: When Bluetooth is disabled and having an active call in loudspeaker mode on an EX
classified handset, the audio will not be transferred to the Peltor hearing protection headset
when connecting it.
3 Basic Operation
Tip: For information on how to answering/ending a call, see 5.1 Incoming Call on page 38.
3.1 Switch the Handset On and Off
Switch on the Handset
Press and hold until the handset vibrates and the display lights up.
Switch off the Handset
Prerequisite: The handset is in idle mode.
Tip: While in a menu, press to return to idle mode. If the handset is a shared phone, it
must first be logged out to be able to switch off the handset. See 3.2 Log In or Out of a
Shared Phone.
1Press and hold .
2 A Switch off? dialog window is displayed. Confirm by pressing "Yes".
To Next Page
Loading...
Need help?
General
