TD 92644EN
User Manual
Ascom d81 DECT Handset
5 Calling
42
18 June 2018 / Ver. K
2 Select "Contacts".
3 Select "Call contact" for searching a local or company phonebook contact, or select
"Central phonebook" for searching a central phonebook contact.
4 Select or search contact.
The selected contact can be called by pressing "Call" or . When calling the contact, the
first call is put on hold. See also 5.3.6 Start a New Call during Conversation on page 42.
5.3.3 Open Messaging during a Call
The Messaging menu can be accessed during an ongoing call by pressing the soft key
"More".
1 Press the soft key "More" during the call.
2 Select "Messaging".
See 7.4 Messaging on page 63 for more information about messaging.
5.3.4 Turn the Microphone on or off during a Call
1 Press "More" during the call.
2 Select "Microphone off".
3Press "Select".
The icon indicates a silenced microphone. This means that the other part in an ongoing
call cannot hear you. To turn the microphone back on, do as follows:
1 Press "More" during the call
2 Select "Microphone on".
3Press "Select".
The microphone can be turned on and off by long pressing or .
When long pressing or pressing , a short peep is also heard indicating that the
microphone is turned on or off. When pressing in a PTT group call, no beep is heard.
5.3.5 Audio Transfer
NOTE: This option is only visible if Bluetooth connection is active.
To transfer audio between the Bluetooth headset and the handset’s earpiece, do as
follows:
1 Press "More" during the call.
2 Select "Audio transfer".
3Press "Select".
5.3.6 Start a New Call during Conversation
1 Press "More" during the call.
2 Select "New Call".
3Press "Select".