ASCOM D81 User Manual

TD 92644EN
User Manual
Ascom d81 DECT Handset
7 Menu Operation
77
18 June 2018 / Ver. K
7.8.4 Display Settings
Screen Saver
The screen saver can be set to one of the following settings:
• Information: Displays status and identification information while the handset is idle.
• Black: The screen is black when the handset is idle.
• Black also in call: The screen is also black when the handset is in call.
To set the screen saver:
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select “Display”.
4 Select “Screen saver”.
5 Select “Information”, “Black”, or “Black also in call”.
6Press "Back".
NOTE: When charging the handset and the screen saver is shown, no missed calls and
incoming messages are indicated in the display.
When the handset is in a CR3 charging rack, the owner ID and the variant of the handset are
displayed. This simplifies identification when many handsets are charged together.
Brightness
NOTE: An intrinsically safe handset’s display brightness is lower than a non-intrinsically safe
handset’s display brightness due to current limitations.
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select “Display”.
4 Select “Brightness”.
5 Select “Normal” or “Power save”.
6Press "Back".
Contrast
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select “Display”.
4 Select “Contrast”.
5 Step with to increase and to decrease the contrast.
6Press "Back".

ASCOM D81 Specifications

General

Brand	ASCOM
Model	D81
Category	Handsets
Language	English