TD 92644EN
User Manual
Ascom d81 DECT Handset
7 Menu Operation
85
18 June 2018 / Ver. K
4 Select "Rename System".
5 Select system to rename.
6 Enter new name.
7 Select "Save".
Priority
The default order of priority is the order of entered subscriptions. This means that the first
subscribed system has the highest priority. This list can be edited by the user. It is possible
to set the systems in priority by moving them up or down in the list.
NOTE: This is used in combination with system set to be "Automatic", see Change System
on page 83.
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select "System".
4 Select "Priority".
5 Change the priority if needed by selecting "Up" or "Down". The priority is saved when
"Back" is selected.
7.9.4 In Charger Action when in Call
It is possible to determine actions to be performed when a handset is placed in charger
during a call.
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select "In charger".
4 Select "Call behavior".
5 Select one of the following:
• No action - no action is performed when handset is placed in charger during a
call.
• Loudspeaking - The loudspeaker is activated when handset is placed in charger
during a call.
• End call - The call is disconnected when handset is placed in charger.
7.9.5 In Charger Action when not in Call
It is possible to determine actions to be performed when a handset is not in call and placed
in charger.
NOTE: Additional In charger actions can also be configured, see the handset’s
Configuration Manual.
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select “In charger”.
To Next Page
Loading...
Need help?
General
