TD 92644EN
User Manual
Ascom d81 DECT Handset
7 Menu Operation
83
18 June 2018 / Ver. K
2 Select in the menu.
3 Select "Headset".
4 Select the corresponding headset type from list, that is, "Mic on boom", or "Hearing
protection". Additional headsets
1
might be visible in the list.
5Press "Select".
TIP: It is possible to configure the headset button with a specific function, such as post-dial,
dial last called number, or dial a predefined number. See the handset’s Configuration
Manual for more information.
NOTE: When Bluetooth is disabled and having an active call in loudspeaker mode on an
intrinsically safe handset, the audio is not transferred to the headset when connecting it.
IMPORTANT: The headset Microphone on a boom is not available as accessory for the
intrinsically classified handset. If used, it is NOT permitted to use the headset
in hazardous areas.
7.9.3 System
The handset can subscribe up to eight different systems.
Change System
Select “Automatic” or a specific system. If the handset is set to “Automatic”, it selects a
system according to the priority list, see Priority on page 85.
Subscribe Handset in IP-DECT System using Easy Registration
A handset can subscribe to an IP-DECT system automatically if the following are fulfilled:
• The IP-DECT system is configured for Easy Registration, see Installation and Operation
Manual, IP-DECT Base Station and IP-DECT Gateway, TD 92579EN.
• The handset’s extension number and IPEI are registered in the IP-DECT system, see the
corresponding manual for the IP-DECT system.
• The handset is not subscribed to any systems.
• The handset software is version 3.0.x or greater.
1 If needed, switch off the handset by pressing .
2 Switch on the handset by pressing .
3 Select language to be used or press "Cancel". If Cancel is pressed, the default
language English is used.
4 The handset starts to search for IP-DECT systems and subscribes to the system when
it is found.
NOTE: If no system is found within 2 minutes or "Cancel" is pressed, the handset’s
subscription menu is displayed. Continue with step 5 in chapter Subscribe Handset in
DECT System Manually for more information.
1.Only visible if a headset profile has been configured in the PDM/Device Manager.