TD 92644EN
User Manual
Ascom d81 DECT Handset
Appendix A. Bluetooth Headset
114
18 June 2018 / Ver. K
A.4 Headsets
A number of Bluetooth headsets for different work situations have been tested together
with the handset. Refer to the Ascom Wireless Extranet Website for a list of verified
Bluetooth headsets.
Since the handset supports the Bluetooth 2.0 standard, other non-verified headsets may
also work.
NOTE: Your Bluetooth headset may have more or less functions than described here, refer
to the Manual for the Bluetooth headset.
A.5 Operation
Step between the menus with the navigation key. Confirm each menu
selection by pressing the Soft key "Select".
A.5.1 Enable Bluetooth
To enable the Bluetooth function enter in the handset menu, select "Bluetooth" and
select “Enable”.
NOTE: When enabling Bluetooth on an intrinsically safe handset, it is restarted.
A.5.2 Pair and Connect a Bluetooth Headset
Before a headset can be used, a connection (pairing) between the headset and the handset
must be established.
1 Place the Bluetooth headset and the handset next to each other.
2 Enable Bluetooth, see A.5.1 Enable Bluetooth.
3 Put the Bluetooth headset in pairing mode, see the user manual for the Bluetooth
headset.
4 Enter the menu by pressing "Menu".
5 Select in the menu.
6 Select "Bluetooth".
7 Select "Headset".
8 Select "Add new". An information text "Put headset in Pairing mode" is displayed.
9 Press "OK". It will now search for a Bluetooth headset for connection.
10 When headset is found, press "Pair".
11 If needed, enter PIN code, see user manual for the Bluetooth headset. Press "OK".
The dialog Successful pairing appears if the pairing process was successful. The
Bluetooth headset will also be connected indicated by the icon in front of the
headset.
To Next Page
Loading...
Need help?
General
