ASCOM D81 - Connections; Bluetooth

TD 92644EN
User Manual
Ascom d81 DECT Handset
7 Menu Operation
81
18 June 2018 / Ver. K
Edit Alarm Data
Information (for example a handset’s location) can be sent along with an alarm. It is
recommended to create a shortcut for quick access to the "Edit alarm data" menu, see 7.7
Shortcuts on page 71.
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select "Alarm".
4 Select "Edit alarm data".
5 Enter alarm data.
6Press "Save".
7.9 Connections
7.9.1 Bluetooth
Enable Bluetooth Connection
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select "Bluetooth".
4 Select "Enable". A Bluetooth connection icon is displayed in the header bar.
NOTE: When enabling Bluetooth on an intrinsically safe handset, it is restarted.
Disable Bluetooth Connection
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select "Bluetooth".
4 Select "Disable".
NOTE: When disabling Bluetooth on an intrinsically safe handset, it is restarted.
Pair/Connect Bluetooth Headset
To be able to use a Bluetooth headset, it must first be paired with the handset. It is only
needed to pair the Bluetooth headset once. A paired Bluetooth headset is automatically
connected, as indicated by the icon in front of the headset.
1 Set the Bluetooth headset in pairing mode, see the user manual for the Bluetooth
headset.
2 Enable Bluetooth, see Enable Bluetooth Connection.
3 Enter the menu by pressing "Menu".
4 Select in the menu.
5 Select "Bluetooth".