ASCOM D81 User Manual

TD 92644EN
User Manual
Ascom d81 DECT Handset
6 Alarm Operation
46
18 June 2018 / Ver. K
• This function can also be activated by selecting another answering method, that is,
"Automatically" and/or "Loudspeaking". See 7.8.6 Answering on page 78.
5.5 Call Diversion
Internal calls, external calls, calls when busy, or calls at no answer can be diverted to
another telephone number.
The diversion is made via the Calls menu > Call services > Divert calls. See 7.1.9 Call
Services on page 57.
It is also possible to create a shortcut to the “Call Services” function or activate a call service
when a profile is activated. See the handset’s Configuration Manual for information.
NOTE: PBX settings for the call diversion must be set to show the Divert calls menu in the
handset. See the handset’s Configuration Manual.
5.6 Declining a Call with a Predefined Message
A call may be declined with a predefined message by the called party provided that both
parties are connected via an IP-DECT system. To decline a call with a predefined message
when the handset rings, perform the following steps:
1 In response to the "Reply with a message template?" prompt, press the "Yes" soft key
to send a message to the caller. A list of predefined messages is displayed in the
"Templates" menu.
2 Select, and if required, edit the message as described in 11.7.1 The Templates Menu
on page 93.
3 Click the soft key "Send". The calling party number is displayed in the handset
display.
4 Click the soft key "Send". A "Message sent" confirmation is displayed and the
message is sent to the caller.
5.7 Emergency Calls
If configured in the PDM/Device Manager, any one of up to five emergency numbers can be
called. An emergency number can be called even if the handset or keypad has been
locked. For additional information, see sections 7.8.2 Keypad Lock Settings on page 74 and
7.8.3 Phone Lock Settings on page 75.
6 Alarm Operation
The parameters described in this chapter are set in the PDM/Device Manager. See the
handset’s Configuration Manual.
NOTE: The alarm functionality is applicable for the d81 Protector only. In addition, some
functions are not available when upgrading the product license from d81 Messenger to d81
Protector, or require a functionality license. See the following chapters for more information.

ASCOM D81 Specifications

General

Brand	ASCOM
Model	D81
Category	Handsets
Language	English