TD 92644EN
User Manual
Ascom d81 DECT Handset
7 Menu Operation
63
18 June 2018 / Ver. K
Activate Profile
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select profile from list.
When a profile is activated, the icon and the name of the profile are displayed in idle
mode.
Delete Profile
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select profile from list.
4Press "More".
5 Select "Delete" from menu.
6Press "Select".
7 Press "Yes" to confirm.
Edit Profile
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select the profile to edited.
4 Press "More" and then select "Edit".
5 Following options can be performed:
• Edit the wanted setting by marking it and then press "Edit".
• Add additional settings by pressing "More" and then select "Add setting" or
"Import from".
• Remove a setting by marking it and then select More > Remove setting.
6 If needed, mark the added settings and press "Edit" to make the changes.
7.4 Messaging
When a text message is received, the LED starts flashing green once and the message alert
signal sounds. The icon and the content of the received message are automatically
displayed. The icon remains in the display until all new messages are opened. If the
message is received during a call, a beep notifies the user.
TIP: It is possible to change how incoming messages are indicated while charging a
handset. When activated, only the icon is displayed and the message alert is muted
when receiving a message. See the handset’s Configuration Manual for more information.
A message can also be read later by pressing "Close". A received message is stored in the
Inbox. See Read a Stored Message on page 64.
TIP: If you want to close several new messages quickly, press . The messages are
indicated as unread messages in the Messaging inbox.
The thirty last received messages are stored in the inbox. Time and date information is
included in the message.
To Next Page
Loading...
Need help?
General
