TD 92644EN
User Manual
Ascom d81 DECT Handset
Appendix A. Bluetooth Headset
115
18 June 2018 / Ver. K
TIP: The headset button can be configured with a specific function, such as post-dial, dial
last called number, or dial a predefined number. See the handset’s Configuration Manual for
more information.
A.5.3 Add another Bluetooth Headset
Up to eight Bluetooth devices can be paired to the handset, but only one at a time can be
selected. To pair another headset repeat section “Pair and Connect a headset” steps 1-6.
The paired headsets are displayed by a default name in the handset menu “Headset”. See
A.5.6 Change the name of Bluetooth headset
A.5.4 Select a Bluetooth Headset
To activate a Bluetooth headset, enter in the handset menu, select “Bluetooth” >
“Headset”. Step with the navigation key, and to the headset to be selected and press
"Select". Connection successful is displayed. The headset is now selected.
When a new headset has been selected any previous headset will automatically become
disconnected.
A.5.5 Remove a Bluetooth Headset
To remove a Bluetooth headset, enter in the handset menu, select Bluetooth >
Headset. Step with the navigation key, and to the headset to be removed and press
"More". Select "Delete". Confirm with "Select".
A.5.6 Change the name of Bluetooth headset
The name, in the headset list, of the headset is the default name for the headset.
To change the name enter in the menu, select “Bluetooth” > “Headset”. Step with the
navigation key, and , to select the headset. Select "More" > “Edit name”. See 2.1.2
Alphanumeric Keys on page 14.
A.6 Calling
A.6.1 Make a Call
Dial the number on the handset and press "Call", or . When “Transfer call to phone?” is
displayed press "No" or ignore the message to use the Bluetooth Headset. Press "Yes" to
use the handset.
A.6.2 Answer a Call
A ring signal sounds in both the selected Bluetooth headset and the handset to signal an
incoming call.
To answer the call in the Bluetooth headset, press the button on the headset (for
instructions, see headset manual).
To answer the call in the handset, press on the handset.
To Next Page
Loading...
Need help?
General
