TD 92644EN
User Manual
Ascom d81 DECT Handset
11 Enhanced Messaging
89
18 June 2018 / Ver. K
• DECT location information
1
and/or LF location information
2
• Centralized Management showing online information
• Site Survey Tool for indication of radio signal and base station listing
• Fault logging
• License upgrade menu
• Frequency band selection
3
• System menu with ability to alter protection
• Factory reset option
For quick access to the Device Information (DI) menu in idle mode, press the keys
containing *#DI# (that is *#34#). For quick access to IPEI/IPDI, press *#06# in idle mode. See
the table below.
10.2 Clear Lists in Charger
A parameter can be set using the PDM/Device Manager to clear the messaging and call lists
that have been stored in the handset. When the parameter is activated and the function has
been downloaded to the handset, the lists are deleted when placed in a charger. This can
be useful during administration of handsets for new users. See also the handset’s
Configuration Manual.
11 Enhanced Messaging
11.1 Receive a Message with Request for Answer
In the status bar, a message with request for answer is indicated the same way as an
ordinary message, see 7.4 Messaging on page 63.
In the message list, the message with request for answer is indicated by the icon .
11.1.1 Accept/Reject the message
Press the soft key “Accept” or “Reject”.
1.This is a license dependent feature.
2.Requires a handset that supports LF location.
3.This option is removed when the frequency band has been set.
Information Code
Software version *#34#
Hardware version *#34#
License *#34#
IPEI/IPDI *#34# or *#06#
User ID *#34#
To Next Page
Loading...
Need help?
General
