ASCOM D81 User Manual

TD 92644EN
User Manual
Ascom d81 DECT Handset
5 Calling
45
18 June 2018 / Ver. K
3 Press "Select". The new call is now connected, and the first call is on hold.
When the line is free, the call on hold is automatically dialled again. This is a system
dependent feature.
Method 2
If a second caller calls during a phone call, the handset beeps and displays the text "Internal
call" for internal callers and "External call" for external callers. The handset also shows the
name or phone number of the second caller. To answer the second caller:
1 Press the soft key "Accept".
The text "Switch" briefly appears on screen, and the handset transfers to the second
call. The first call is put on hold.
2 When finished speaking with the first caller, select the "More" soft key.
3 Select "End Call".
4 The second call is closed and the first call is retrieved.
NOTE: It is possible to reject a second call by pressing the "Decline" soft key. The second
caller hears a busy tone, and the call is logged as a missed call in the handset.
5.3.15 DTMF
Some systems or PBXs require that the handset sends Dual Tone Multi Frequency (DTMF)
when pressing the keys. DTMF can be enabled as follows:
1 Press the soft key "More" during the call.
2 Select "DTMF".
3 Press "Select" to enable the use of DTMF.
TIP: It is also possible configure the handset to send DTMF when pressing and pressing/
releasing . See the handset’s Configuration Manual.
5.3.16 DECT Info
This submenu is only visible if the Admin menu is activated. See handset’s Configuration
Manual.
5.4 Loudspeaking Function
There are several options to activate the loudspeaking function:
• Press a Navigation key, Hot key or Soft key defined as a shortcut to a "Phone call
"
function. When pressing the key, a predefined number is called, see 7.7 Shortcuts on
page 71.
• When receiving a call, press the soft key . The left Soft key might have another/no
function depending on its configuration of the In call function in PDM/Device Manager.
• During a call, press the soft key . The left Soft key might have another/no function
depending on its configuration of the In call function in PDM/Device Manager
• During a call, put the handset in a charger. Requires that the parameter Call behaviour is
set to "Put on Loudspeaker" in PDM/Device Manager. See the handset’s Configuration
Manual.

ASCOM D81 Specifications

General

Brand	ASCOM
Model	D81
Category	Handsets
Language	English