TD 92644EN
User Manual
Ascom d81 DECT Handset
7 Menu Operation
62
18 June 2018 / Ver. K
View Last Search Result
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select "Central phonebook".
4 Select "Last result". Only the last result is displayed.
7.3 Profiles
It is possible to set up an own profile for incoming calls, message alerts, vibrating alerts, key
sound, soft keys etc.This can be useful when there are several users on the same handset,
and they want different sound profiles. It can also be used for temporarily settings, for
example while in a meeting when incoming calls should be silent. It is easy to switch
between the different profiles.
If no profile is selected, the normal settings are used.
NOTE: The settings in a profile can be superseded if the corresponding settings in a system
profile are activated. When the system profile is activated, its settings is not displayed in the
handset menu. However, it is possible to display when a system profile is activated in the
handset. See 9 System Profiles on page 87.
Add New Profile
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select "Add new".
4 Enter name of the profile.
5Press "Save".
6 Press "More" and then select "Add setting".
7 Select the setting you want to add to the profile.
Repeat steps 6-7 if you want to add additional settings.
8 Mark the wanted setting and press "Edit" to make the changes.
It is also possible to create a new profile based on another profile by do the following:
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select "Add new".
4 Enter name of the profile.
5Press "Save".
6 Press "More" and then select "Import from".
7 Select the profile which settings to be used for the new profile.
8 If needed, press "More" and then select corresponding option to add/import
additional settings or remove settings.
To Next Page
Loading...
Need help?
General
