TD 92644EN
User Manual
Ascom d81 DECT Handset
8 Procedure Call
86
18 June 2018 / Ver. K
4 Select "Other actions".
5 Select one of the following:
• No action - no action is performed when handset is not in call and placed in
charger.
•Switch off
1
- When the handset is placed in the charger it will switch off. When it is
removed from the charger it will switch on again.
•Sound off
2
- The handset is muted when placed in the charger. When it is
removed from the charger it switches on the sound again. NOTE: Messages with
breakthrough, for example high or alarm priority, is not muted
3
.
• Logout - The handset is logged out when placed in the charger and call and
message lists are deleted. When it is removed from the charger, the user needs to
log on again. NOTE: This feature is license dependent and applicable in IP-DECT
systems only. See also 3.2 Log In or Out of a Shared Phone on page 23.
• Change profile - when the handset is placed in the charger it changes profile.
When the handset is removed from the charger, the profile is changed back.
Press "Edit" and select the wanted profile. By default only the profile Normal is
visible, but additional profiles is visible if they are configured. See 7.3 Profiles on
page 62.
8 Procedure Call
When configuring the functions Call services, In Call menu, Contacts, or a shortcut/service
to the Phone call function, the data added in these functions is static. When entering the
data for the function to be used, it is possible to add a variable/character U that allows the
user to enter additional numerical characters before calling the number/sending the data to
a system.
See the following example for more information.
Example of configuration:
A user wants to create a service with the Phone call function. The PBX requires that a prefix
must be added to a phone number. In this case, the user can pre-program the prefix and
then enter the applicable phone number when using the Phone call function.
1 Press "Menu", or the confirmation button.
2 Select "Services".
3 Select "Add new".
4 In the Name field, enter "Call no.".
5 Select the function "Phone call".
1.If the parameter Possible to switch handset off is disabled in PDM/Device Manager, the handset
is not switched off in charger.
2.If the parameter Possible to turn off sound is set to "No" in PDM/Device Manager, the handset
is not muted in charger.
3.If you want to mute all messages (regardless of priority), set the Show and indicate incoming
messages
parameter via PDM/Device Manager.
To Next Page
Loading...
Need help?
General
