TD 92644EN
User Manual
Ascom d81 DECT Handset
10 Advanced Functions
88
18 June 2018 / Ver. K
A user wants to deactivate the alarms and selects Settings >Alarm>Activate alarm. The
check boxes do not indicate that the alarms are activated. The user can mark or unmark the
checkboxes without that the alarm settings is changed due to the settings in the system
profile supersedes the settings made by the user.
Tip: If this system profile is always to be active, it is recommended to hide the Alarm menu in
the handset using PDM/Device Manager.
Figure 10. Example showing an activated system profile.
9.1 System Profile Status Indications
The administrator may configure the handset to play a sound if the system profile is
activated or deactivated. This provides the user with an audible alert when the system
profile changes from inactive to active or vice versa.
The feature can be triggered by several kinds of event, such as moving between different
parts of a buildings where a system profile might be appropriate in one location but not
required in another.
The system profile name is displayed when the handset is in idle mode. The user should be
aware that the characteristics and behaviour of the handset change when the system
profile changes. For the exact sound and characteristics of the handset associated with the
activation and deactivation of a system profile, refer to the system administrator.
10 Advanced Functions
10.1 Admin Menu
The handset has a hidden menu for system administrators. See the handset’s Configuration
Manual.
The Admin menu contains:
• Software, hardware and license information, IPEI/IPDI, and user ID
• DECT information
12:34
Menu
01/01/2010
System Profile A1
1122
12:34
Select Back
Activate alarm
Pull-cord
Man-down
No-movement
To Next Page
Loading...
Need help?
General
