TD 92644EN
User Manual
Ascom d81 DECT Handset
Appendix B. Bluetooth Barcode Reader
119
18 June 2018 / Ver. K
Appendix B. Bluetooth Barcode Reader
B.1 Introduction
NOTE: The Bluetooth barcode reader requires that the license dependent Bluetooth Data
Profile feature is enabled. See the handset’s Configuration Manual.
Bluetooth supported functions:
• Pair the handset with it’s Bluetooth barcode reader
• Choose which device to use when scanning barcodes
• Scan barcode(s) and send the information to a handset/system.
B.2 Icon
See 2.1.3 Icons and Text in the Display on page 15.
B.3 Bluetooth Barcode Readers
A number of Bluetooth barcode readers for different work situations have been tested
together with the handset. Refer to the Ascom d81 DECT Handset Data Sheet for a list of
verified Bluetooth barcode readers.
NOTE: The Bluetooth barcode reader may have more or less functions than described here,
refer to the Manual for the Bluetooth barcode reader.
B.4 Operation
Step between the menus with the navigation key. Confirm each menu
selection by pressing the soft key "Select".
B.4.1 Enable Bluetooth
To enable the Bluetooth function enter in the handset menu, select Bluetooth and
select “Enable”.
B.4.2 Pair and Connect a Bluetooth Barcode Reader
Before a Bluetooth barcode reader can be used, a connection (pairing) between the
Bluetooth barcode reader and the handset must be established.
1 Place the Bluetooth barcode reader and the handset next to each other.
2 On the handset, enter in the menu, select “Bluetooth” > “Barcode reader” >
“Add new”.
3 Put the Bluetooth barcode reader in pairing mode (for instructions, see barcode
reader manual)and press the soft key "OK". The handset starts to search for the
Bluetooth barcode reader.
To Next Page
Loading...
Need help?
General
