ASCOM D81 User Manual

TD 92644EN
User Manual
Ascom d81 DECT Handset
Appendix B. Bluetooth Barcode Reader
120
18 June 2018 / Ver. K
4 When the Bluetooth barcode reader is found it is displayed in the Barcode reader
found list. Press the soft key "Select" on the handset to select the Bluetooth barcode
reader. The pairing starts.
5 A PIN-code is requested for the Bluetooth barcode reader. Enter the PIN-code
1
and
press "Select" on the handset. Pairing successful is displayed.
6 The paired Bluetooth barcode reader is displayed in the handset menu “Barcode
reader”.
B.4.3 Add another Bluetooth Barcode Readers
Up to eight Bluetooth devices can be paired to the handset, but only one at a time can be
selected.
To pair another Bluetooth barcode reader, repeat section B.4.2 Pair and Connect a
Bluetooth Barcode Reader on page 119.
The paired Bluetooth barcode readers are displayed by a default name in the handset
menu Barcode reader. See B.4.6 Change the name of Bluetooth Barcode Reader.
B.4.4 Select a Bluetooth Barcode Reader
To activate a Bluetooth barcode reader, enter in the handset menu, select Bluetooth >
Barcode reader. Step with the navigation key, and to the barcode reader to be
selected and press the soft key "Select". "Connection successful" is displayed. The barcode
reader is now selected.
When a new barcode reader has been selected, any previous barcode reader will
automatically become disconnected.
B.4.5 Remove a Bluetooth Barcode Reader
To remove a Bluetooth barcode reader, enter in the handset menu, select "Bluetooth"
> "Barcode reader". Step with the navigation key, and to the barcode reader to be
removed and press the soft key "More". Select "Delete". Confirm with the soft key "Yes".
B.4.6 Change the name of Bluetooth Barcode Reader
In the barcode reader list, the name of the barcode reader is the default name for the
barcode reader.
To change the name, enter in the menu, select “Bluetooth” > “Barcode reader”. Step
with the navigation key, and , select the barcode reader. Select More > Edit name. See
2.1.2 Alphanumeric Keys on page 14.
B.5 Barcode Reader Operation
B.5.1 Using the Bluetooth Barcode Reader
The procedure on how to use the Bluetooth barcode reader may vary depending on which
type/model that is used. Refer to the manual for the Bluetooth barcode reader. The
following instruction can be used as a guideline.
1 Press the button (for instructions, see barcode reader manual) of the barcode reader
to scan a barcode. The barcode reader may give a beep to confirm that the barcode
has been read and sends the information the handset.

ASCOM D81 Specifications

General

Brand	ASCOM
Model	D81
Category	Handsets
Language	English