TD 92644EN
User Manual
Ascom d81 DECT Handset
14 Maintenance
98
18 June 2018 / Ver. K
•Call list
•Messages
• Bluetooth pairing list
•License(s)
1
14.2.1 Before Starting Easy Replacement Procedure
1 Check that both the old handset (that is, the handset to be replaced) and the new
handset (that is, the replacement handset) are of the same device type (d81).
TIP: Easy Replacement can be performed between different product licenses (that is d81
Messenger and d81 Protector). The new handset’s product license is not replaced by the
old handset’s product license during the procedure.
2 Make sure that the handset batteries are charged before starting the easy
replacement procedure.
3 Switch off the new handset by long pressing .
14.2.2 Easy Replacement Procedure
During the Easy Replacement procedure, the LEDs of the handset and the charger follow
the same LED indications. This means that if the old handset has a broken display, the LED
indications on the charger and on the handset can be used to follow the replacement
procedure. Before and after easy replacement, the LEDs may have different LED
indications. For more details, see LED Indications during Easy Replacement on page 100.
IMPORTANT: Never remove a handset from the charger until the instructions in the display
or the LED tells you to do so (see status on the LED if the display is broken). If there is an
error indication it may be allowed to remove the handset, see 15 Troubleshooting on page
102 for further instructions. After the old handset has been in the charger, the new handset
needs to be placed in the charger regardless if the replacement was successful or not.
Failing to do so may result in malfunction and the new handset will need to be sent for
service.
1. A handset’s product license, for example d81 Protector, and/or license dependent functions can
be moved to an unlicensed handset (d81 Messenger) using PDM/Device Manager.
To Next Page
Loading...
Need help?
General
