Ch. 13. Cell Body and Sample Stage Guide Sec. 13.5. Storage
(a) Heater Stage (b) Gas Cell Body (c) Passive Stage
Figure 13.8.: Various stages and cell bodies stored in their containers.
13.5.2. Storing disassembled cell bodies
Once a sample stage has been removed from a cell body (See
13.3.1), the cell body should be stored in
the membrane container in which it shipped. See Figure 13.8 on page 172.
For cell bodies were recommend storing the membrane clamping ring attached tot the cell body with its
eight screws and placing any other associated accessories such as cables with the cell in the box.
DRAFT
Page 172
To Next Page
Loading...