Ch. 21. Shipping or Moving Sec. 21.4. Shipping a Complete Cypher AFM System
15.
Place 1-2 plastic bags over the enclosure once
it is already in the box to protect the finish
from damage.
16.
Slide on top the foam (in 2 pieces) – one on
each side.
17. Place the power cord for the airbase in the foam cut-out.
18. Place the 3/32 Hex Driver in the foam cut-out.
19. Close the box and tape it shut.
Warning
SCANNER BOX SHOULD REMAIN UPRIGHT AT ALL TIMES IF POSSIBLE WHEN
SHIPPING IN A CRATE OR ON A PALLET.
21.4.6. View Module: Removal and Packaging
STOP!! Call or otherwise contact Asylum Research and talk to us before moving anything. Chances
are that with a few phone calls and the help of this chapter you can do the job yourself. Not calling us
will likely result in instrument damage, costly repairs and downtime, and the voiding of your warranty.
Materials
991.005: Cardboard Carton 20”x14”x8”
990.037: Foam (Cypher Optics & Accessory)
Lens Tissue
Kapton Tape (1/2” or 3/4”)
Tools 290.105: 3/16” Ball End Allen Wrench L-Key
Final Wt 11 lbs / 5 kg
BETA
Page 251
To Next Page
Loading...