Ch. 21. Shipping or Moving Sec. 21.4. Shipping a Complete Cypher AFM System
5.
Kapton tape the ground cable (green &
yellow cable on back side of chassis) straight
down behind the board (Do not tape to the
side, as it must be back to be safe from the
shipping guard/mullet).
6.
Use lens tissue and Kapton tape to fill and
cover the objective hole in the underside of
the head.
7.
a) Tape down the scanner release lever
b) Tape down the scanner connector cable
so it does not move in shipment.
8. Once everything is secure, put on the shipping guard/mullet (NOTE: there are variations of this
design in the field.).
BETA
Page 257
To Next Page
Loading...