Ch. 21. Shipping or Moving Sec. 21.4. Shipping a Complete Cypher AFM System
a)
If this is shipping for the first time, put 5
pieces of foam tape inside the pullet (2 on
each side and one in the middle ) to pad it
and make it slide easier – avoid putting
tape over the screw holes!
b)
Slide on the guard carefully.
c)
1-2 screws need to go in either side using a
1/8” Hex Wrench L-key (part#290.119).
(SCREW INFO: 10-32 x ¼ or ½ BHCS SS
depending on which guard you have)
BETA
Page 258
To Next Page
Loading...