33
Editing SCALE
○
Measurement mode settings
1. Touch the mode window on
the lower left corner.
2. Change the mode, wait time,
number of continuous
measurements, and target
temperature.
Touch "ENTER.”
※ Mode settings can also be changed from the measurement screen in the same way.
Touch the scale to be edited and touch "EDIT."
Chooses the Resolution.
The upper and lower limit
bars will be displayed if
checked.
Negates the last change
made. (The undo command
cannot be reversed.)
The scale setting details
will be printed to the
printer (available for
purchase) if checked.
※
Each item can be changed within
the below range:
Mode : 1, 2, 3, S or T
Wait time : 0 to 999
Number of measurements : 1 to 99
Target temp : 5 to 75
To Next Page
Loading...
Need help?
General
