18
Level1
• This is the least restrictive permission level, allowing multiple users to take measurements and change
settings easily.
• The guest user can take measurements and change measurement settings.
◎: No password required ○: Password required ×: No operation permitted
Power on Measurements
Measurement
settings
*1
Other settings
*2
System level
settings
ADMIN ◎ ◎ ◎ ○ ○
USER #1-3 ◎ ◎ ◎ × ×
GUEST ◎ ◎ ◎ × ×
Level0
• The security features of the instrument are hardly used. This level is suitable for uses in a very
controlled, secure environment.
• The guest user has access to measurement and other settings.
◎: No password required ○: Password required ×: No operation permitted
Power on Measurements
Measurement
settings
*1
Other settings
*2
System level
settings
ADMIN ◎ ◎ ◎ ◎ ○
USER #1-3 ◎ ◎ ◎ ◎ ×
GUEST ◎ ◎ ◎ ◎ ×
Zero-set Reminder Feature
※ Measuring without first zero-setting the instrument may result in inaccurate results. To prevent this,
the instrument is equipped with the zero-set reminder feature. After the instrument is powered on,
"START" is disabled until zero-setting is performed.
※ See System Information Settings on page 21- "System Information Settings".
※ This feature is turned off at the factory.
To Next Page
Loading...
Need help?
General
